What kind of problems do you usually encounter when using vacuum laminating machine and how to solve it?
The power indicator are not on after powered on; (Plug dropping out or poor power-on contact); (Inspect whether the power line interface is in good contact);
The control screen shows airbag faulty;( top cover is not closed properly; Twisted the knob on the back of the machine; airbag damaged ie vacuum pump abnormal); ( close the cover in place again, ensuring proper sealing ring; loose the knob about two circle; replace the relevant parts);
The control screen shows vacuum faulty; ( Loose at the air tube connection; the setting of vacuum value is wrong); (vacuum pump works abnormally; vacuum value < the vacuum value you set)
Cured Lamination large area with bubbles; (Unsuitable OCA thickness; Airbag damage or vacuum pump abnormal; middle frame deformation); (Inframe 250um/Outframe 150um; Contact after-service to replace relvant parts; Replace middle frame);
Curved lamination there are bubbles in the corners; (Glass is not orginal); (Replace the glass);
Flat and curved lamination there are big bubbles; (Airbag faulty/vacuum faulty; During position operation, the glass and the LCD touch together); (Contact after-sales service; make the position operation standardize)
Flat and Curved laminate there are small bubbles; (The screen entered dust; the time is not enough for debubbles); (Clean the screen before lamination; Extended debubbles time);
Vacuum pump no sound or no vibration after startup; (vacuum pump does not work); (contact after-sales service);
About our machine warranty
● This guarantee provides you with free repairs of your machines, including spare parts and technical support, for up to 12 months.
● Should you experience a technical problem with your machines you can contact one of our specialists on (0086)13713791491 or email to support@ocamaster.com who will advise you on a solution.
● Should we deem your machines beyond repair due to spare parts worn out, we will provide you with a free replacement
By Ovena@OCAMaster
