Model: |
SU8
|
Option: |
220V/50HZ
110V/60HZ
|
About SU8 Cold Light Source UV Laser Machine
● Small size, light weight, and low shipping fee
● Improve the success rate and efficiency of screen repair,help you earn more than others
● Global servers connected to WiFi and automatic upgrade, free forever
● Software will continuously upgrade online
● Support multiple languages
● Drawings of multiple brands and models are available
● Auto focusing* Press "Auto" button to auto-focus, quickly and precisely
● Industry unique self-developed combines infrared and UV light module
● High definition touch screen
Built-in high-definition computer to store a large number of mob-
ile phone model drawings.
Support operating by mouse and keyboard.
Support multiple languages.
●Easily separate the screen in 8 simple steps
1.Power the machine and press the "Laser" button to start preheating (about 2 minutes) until emits the white light
2.Put the screen into the laser machine, press the positi-oning rod onto the screen, and press the "Auto"button
Note: Just fine-tune the local drawing when separating screens of similar or same height in batches, no need to adjust focus every time.
3.Select the corresponding program on the interface
(options: Frame, Screen separation,Back cover,Camera glass) Make sure it is an original screen when using the UV laser machine on the screen. Only the original screen can be used on this machine.
Note 1: Since non-original screens may use different kinds of OCA, it is easy to damage the screen polarizer by separating the screen with this machine.
Note 2: As the OCA of non-original screen is relatively soft, it can be separated directly by cutting wire. The frame can be separated by the laser machine.
4.Click“Start”and wait for the laser work to be completed
Note: The concrete UV and IR light are only for effect demonstration.
5.Place it on the screen separator and fix it (lf the screen is smashed, you need to stick Frame separation a glass sheet on the smashed screen)
6.Frame separation
7.Depending on the repairer's skill level, it can be separated by hand (risky) or cutting wire (secure)
8.After the laser work is completed, take out the mobile phone and finish the screen separation
●Built-in smoke purification system
Multiple air purification, rapid smoke exhaust, no need for external smoke exhauster
●Selected galvo scanning system, 2-5 times faster than ordinary galvo scanners
● External heat emission hole, Fast heat dissipation, efficient operation
● Shortcut button + touch screen two operatlon modes One touch, auto focus, user-friendly operation
●Comes with black cardboard, Help to calibrate easily and fast
●Light switch,You can turn on the light for obse-rvation when it is dark
●Also has new functions Engraving DIY is easy, Personalization and self-entertainment in leisure time, you can start live streaming even at a street stall